Download the Arduino Software (IDE) Get the latest version from the download page. The file is in Zip format; if you use Safari it will be automatically expanded. If you use a different browser you may need to extract it manually. May 16, 2020 They are included in the Unified Firmware download and available separately here: CH340 Drivers & FT232 Drivers If you are on the latest Mac OS you must use Arduino 1.8.12 or higher due to 64bit application enforcement that Apple put in place.
editInstall the driver¶
Installing drivers for the Seeeduino with window7¶
![Arduino Arduino](/uploads/1/2/6/4/126419303/947104485.jpg)
- *Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail.* Open the Device Manager by right clicking “My computer” and selecting control panel.* Look under Ports (COM & LPT). You should see an open port named 'USB Serial Port' Right click on the 'USB Serial Port' and choose the 'Update Driver Software' option.
- * Next, choose the 'Browse my computer for Driver software' option.
- * Finally, select the driver file named 'FTDI USB Drivers', located in the 'Drivers' folder of the Arduino Software download.
Note: the FTDI USB Drivers are from Arduino. But when you install drivers for other Controllers, such as Xadow Main Board, Seeeduino Clio, Seeeduino Lite,
you need to download corresponding driver file and save it. And select the driver file you have downloaded.
Arduino Uno Driver Mac Os
- * The below dialog boxes automatically appears if you have installed driver successfully.
![Arduino Arduino](/uploads/1/2/6/4/126419303/835503715.jpg)
- * You can check that the drivers have been installed by opening the Windows Device Manager. Look for a 'USB Serial Port' in the Ports section.
- * You can also see the serial port in Arduino environment.
Installing drivers for the Seeeduino with window8¶
You should save these files which you are editing before installing driver with window8,because there will several power off during operating.
- * Press “Windows Key” +”R”* Enter shutdown.exe /r /o /f /t 00* Click the 'OK' button.* System will restart to a 'Choose an option' screen* Select 'Troubleshoot' from 'Choose an option' screen* Select 'Advanced options' from 'Troubleshoot' screen* Select 'Windows Startup Settings' from 'Advanced options' screen* Click 'Restart' button* System will restart to 'Advanced Boot Options' screen* Select 'Disable Driver Signature Enforcement'* Once the system starts, you can install the Arduino drivers as same as Windows
Installing drivers for the Seeeduino with Mac OS¶
- * Enter page: [https://www.ftdichip.com](https://www.ftdichip.com).
- * Download Driver for the Mac OS X version, named 2.2.18 (32bit)
- * Open the driver file which you just download, and double click FTDIUSBSerialDriver_10_4_10_5_10_6_10_7.mpkg
Arduino Drivers Mac Os
- * After double click, you will see an installer window.
- * Click “Continue”.
- * You can see the below dialog boxes if you have installed driver successfully.
- * Test it with Seeeduino
Tech Support¶
Please submit any technical issue into our forum.